HL2608 Soft Loop Ratchet Strap Tie-downs
What sets Hydralift's Tie-Downs apart for other Tie-downs:
HL2608
DOT Approved and Proudly Made in the USA
Non-Scratch Soft-Loop Tie-Downs with Twice the Strength:
-
- Made in the USA Easy to Use Non-Slip Ratchet
- 2,500 lb Assembly Strength 883 lb Working Load Limit
- 3,500 lb Industrial Webbing 3,300 lb Ratchet Strength
- Heavy Duty Vinyl Coated Hooks Built-in Soft Extensions
- Corrosion & Rust Resistant Rust Resistant
- Extended Life vs other straps Hydralift Grey
TDA3401 Add-On Eye Type Anchor for 4288-85
Add on Anchor Eye TDA3401 Machined to fit HL4288/85 lifts
The TDA3401 is specially machined from a solid block of steel to provide maximum strength for this Tie-Down Anchor . The Anchors are machine to fit perfectly into the HL motorcycle tie down arm anchor location.
- Never use eye bolts as they will crush/disfigure the tie down arms and the eye bolts will come loose.
- This can not happen with the TDA3401 as they are machined to the diameter and height of the anchor locations.
- Set of 4 Anchors EZ Bolt-on No Drilling
TDF32 Forward Tie-Down Anchor for 4288-85 Lifts
EZ INSTALL
DIRECT BOLT-ON
NO DRILLING
ADDITIONAL 2 ANCHOR LOCATIONS
The Forward Tie Down Anchor Mount adds an additional set of tie-down anchor locations to the furthest location of the motorcycle ramp. This moves your tie-downs straps out and away from your fiberglass faring also providing added security and stability for larger size motorcycles.
Designed for the larger motorcycles that have a full front fairing as with the Honda Goldwing and Harley Ultra type motorcycles. The front wheel stop can still be moved forward or back to center your motorcycle on the Hydralift
HLWC39 Automatic Wheel Chock for 4288-85 Lifts
EZ INSTALL
Honda Goldwing
Harley Dresser
The is designed to assist in loading your motorcycle onto the Hydralift motorcycle lift. Once engaged, it holds your motorcycle in an upright position, freeing you up to secure it with the required tie-downs.
The HLWC39 fits directly into the standard motorcycle ramp of the Hydralift motorcycle lift, ensuring a seamless and secure setup.
This wheel chock is intended for temporary stabilization only—allowing you time to properly secure your motorcycle with tie-downs. Its specialized design holds the front wheel in place while making removal easier when unloading. The HLWC39 does not replace tie-downs and should always be used in conjunction with your tie-downs to safely secure your motorcycle to the Hydralift for travel.
